Ingredients List - Pathway & Patio

Everything you need for your pathway project in one place

This comprehensive guide provides a detailed breakdown of materials and tools required for your project. Whether you’re building a curved pathway or a straight one, our calculator ensures you have everything you need for a successful installation.

Basic Materials

Weed Barrier 350 sq ft
Linear Feet of Bender Board 120 lft
Weed Fabric Rolls (4×100 ft) 4 rolls

Hardware Requirements

Stakes (Straight Area) 60 Stakes
Stakes (Curved Area) 36 Stakes
Screws (3 Per Stake) 108-180 Screws

Recommended Tools

Rubber Mallet
Hammer
Measuring Tape
Shovel

🔧 Hardware Requirements

Coverage Information

1 Gallon of Klingstone Path Cover:

  • 18 sq ft for mixing
  • 12 sq ft for pouring

Mixing: 350 sq ft / 18 sq ft = 19 Gallons

Pouring: 350 sq ft / 12 sq ft = 29 Gallons

Note: You can calculate your covered area and divide by 18 sqft for Mixing Method and 12 sqft for Pouring Method. You will know how many gallons you have to buy.

Color Option

Project Notes
✔
Fast Caps 3 per stake as the suggested item only if stakes are exposed
✔
For ADA compliance, maintain a texture of 1/8 to 5/8 inch
✔
Use 3x100 ft weed fabric rolls for reduced waste
✔
Install stakes every 2 feet on straight sections
✔
For curved sections, place stakes closer together for better support
✔
Large projects should use the 50 gallon Drum, pump and wand, pump flush.
✔
Small projects should use the 1 or 5 gallon and wand.

Klingstone Paths

Bender Board Kits

Bender Boards - Single Unit

Stakes

Fast Caps & Screws

Weed Fabric

Ready to start your project?

Shop DIY materials directly from our store

Shop